ULTRA XT™ Precision
Tooling System - Designed to enhance any punching
operation - Up to 110% extra punch grind life, equals
an extra 0.118(3.00). Quick-change strippers. Quick
length adjustment. Internal lubrication within punch guide. External lubrication
between guide and turret bore. Hardened guides to reduce
turret bore wear. SLUG FREE® dies eliminate slug
Punch Point Range:
0.500(12.70) to 1.250(31.70)
high-speed tool steel for exceptional interval between
regrinds. 1/4 degree back taper and near polished flanks
to reduce friction and eliminate galling. Exceptional
dimensional accuracy for improved hole quality. External lubrication
grooves to allow fluid flow. Single point turned radii
at base of punch point to improve strength. Superior
angularity and concentricity. Available in three styles;
Ultra XT with lubrication grooves, Ultra-Metric which
are compatible with Original Style 1-1/4(B) station
punches and Inch Style which are have a inch style thread.
relieved to allow 0.118(3.00) extra grind life.
Recessed to allow collection of lubrication fluid. Quick-change
mechanism to allow rapid tool change. Rounded edges
to minimise sheet marking. Optional urethane stripper
pads to eliminate sheet marking.
Dies: Highly wear resistant, chrome air hardened
tool steel to balance hardness and toughness. SLUG FREE®
die geometry eliminates slug pulling. Uniform clearance
radii in die corners to eliminate pip marks. Precision
orientation with hardened external pin. Up to 0.118(3.00)
grind life. Superior roundness and flatness with exceptional
Quick length adjustment. Uniform spring pressure. Compatible
with popular alternative tool systems. Available in
three versions; Ultra XT designed to accept the Ultra XT
standard punch with integral lubrication mechanism,
Ultra-Metric which is compatible with Original Style
1-1/4(B) station punches and Ultra-Inch Style
which accepts with Inch Style punches mentioned above.
Guides - quick change mechanism, Internal and external lubrication to reduce friction. Hardened and ground to reduce ware. Three versions available:
- Rounds Only – one internal keyway and one external keyway for rounds only.
- Shape (0&90 Degree) - one internal keyway and two external keyways (set at 0 and 90 degrees) for rounds and shapes.
- Shape (0&45 Degree) - one internal keyway and two external keyways (set at 0 and 45 degrees) for rounds and shapes.